EX308LSI-035M - Exocor ER308LSi .035 Stainless MIG Wire 33lb Spool

Smooth Running 308LSi Stainless Wire for Professional Fabricators

If you are welding stainless steel and want that "stack of dimes" look with less hassle, the Exocor ER308LSi .035" MIG wire is your go-to solution. The secret ingredient here is the extra silicon. While standard 308L is good, 308LSi is better for fluidity. That extra silicon helps the puddle wet out smoothly to the edges, reducing that sluggish feeling you sometimes get with stainless. The result? Flatter beads, less undercut, and significantly less time spent grinding or polishing your welds afterwards.

This 33lb spool is built for the long haul, perfect for shop production where you don't want to be swapping out small spools every few hours. The wire feeds clean and consistent, so you aren't fighting birdnests or burn-backs at the tip. It runs beautifully on DCEP polarity and pairs perfectly with your standard stainless gas mixes. Whether you are fabricating food service equipment, architectural features, or custom automotive exhaust systems using 304 stainless, this wire gives you the control you need.

The low carbon content protects your work from corrosion down the line, ensuring your welds hold up as well as the base metal. At .035", it's the perfect middle-ground size—heavy enough to lay down material quickly on thicker plate, but controllable enough for lighter gauge tubing when dialed in correctly. Upgrade your stainless game with a wire that works as hard as you do.