Lenco 27' Clip-On TIG Torch On/Off Switch with 14-Pin Connector

Freedom from the Foot Pedal

Every TIG welder knows the struggle: you need to weld a joint on a roll cage, up on a scaffold, or underneath a chassis, and there is absolutely no place to put your foot pedal. Or worse, you're trying to balance on one foot while controlling the amps with the other. The Lenco 27' Clip-On On/Off Switch is the solution to these headaches. It puts the power to start your arc right at your fingertips, literally.

This handy little device clips directly onto your TIG torch handle—whether you are running a small WP-9 or WP-20, or the larger WP-17 and WP-26 torches. Once attached, it gives you a simple, reliable button to click the arc on and off. It’s perfect for bump welding, tacking up fit-ups, or just running beads in positions where a pedal is impossible to use. The 27-foot cable is plenty long enough to let you wander away from your machine, giving you the reach you need for big jobs.

The connector is a standard 14-pin plug, which plugs right into the front of most modern Miller TIG machines and many others that use the 14-pin setup. Just plug it in, clip it on, and you are ready to weld. It’s built tough like all Lenco gear, so it can handle the heat and the grime of a real shop. Stop fighting with your pedal placement and get a hand control that makes out-of-position TIG welding a breeze.

Key Benefits for the Welder

• Weld Anywhere: No need for a flat floor surface; weld on ladders, creepers, or in the air.
• Instant Tacking: Great for rapid-fire tack welds without the fatigue of pumping a pedal.
• Long Reach: 27 feet of cable means you aren't leashed tightly to the power supply.
• Easy Setup: Clips on in seconds; no tools required.