235287 - Hobart / Miller Replacement V-Groove Drive Roll for IronMan 230 (.024/.045)

Keep Your IronMan 230 Running Smoothly

Is your wire slipping, stuttering, or birdnesting right when you need to lay down a perfect bead? Often, the culprit isn't the machine or the liner—it's a worn-out or incorrect drive roll. The Miller/Hobart 235287 Drive Roll is the genuine replacement part you need to get your Hobart IronMan™ 230 MIG welder feeding like new again. This isn't just a chunk of metal; it's the traction system for your welding wire, and having a fresh, sharp groove makes all the difference between a frustrating day of troubleshooting and a productive day of welding.

This clever little roller is a two-in-one solution. It is reversible, featuring a slot for .024" wire on one side and .045" wire on the other. This is perfect for shops that tackle a wide range of projects. You might be welding thin fender washers on a restoration project in the morning using .024" wire, and then switching over to weld heavy 1/4" brackets in the afternoon with .045" wire. Instead of hunting for a completely different roller, you simply flip this one over, re-install it, and you are ready to rock. It saves you time, money, and drawer space.

Designed specifically for solid wires (like your standard MIG wire), the V-Groove shape cradles the wire firmly. It provides the grip needed to push the wire through the torch cable without crushing it. Using the wrong type of roll—like a knurled roll on solid wire—can create metal shavings that clog up your liner and ruin your contact tips. Stick with the proper V-Groove 235287 for clean, consistent feeding. Installation is a breeze, taking only seconds to swap out, so you can spend less time wrenching on your feeder and more time under the hood.