Walter Coolcut XX Sanding Disc 4-1/2" Grit 30

Rip Through Welds with the Coolcut XX

When you've got a mountain of welds to grind down and a deadline looming, you don't have time for a disc that glazes over or wears out in five minutes. You need the Walter Coolcut XX 30 Grit Sanding Disc (48A030). This thing is a beast. It's built for one thing: hogging off metal fast. Whether you are working on mild steel, stainless, or even aluminum, this disc bites hard and keeps on eating.

We all know the frustration of burning through a stack of cheap fiber discs just to finish one job. The Coolcut XX is different. It uses Walter's top-tier Zirconia grain that self-sharpens as you grind. This means it stays aggressive right down to the backing. Plus, it runs cooler than standard discs. That means less heat in your workpiece, less chance of warping, and no blue discoloration to clean up later. It's perfect for heavy weld removal, taking down spatter, or prepping a bevel for the next pass.

This 4-1/2" disc fits your standard angle grinder (with a 7/8" arbor) and is rated for 13,300 RPM. Just slap it on a turbo backing pad, and you are ready to rock. The 30 grit is coarse enough to level a heavy weld bead in seconds but controlled enough to give you a consistent finish. If you are tired of changing discs every ten minutes, switch to the Coolcut XX and see the difference. It's the kind of tool that makes the hard work a little bit easier.

• Aggressive Cut: 30 Grit Zirconia rips through steel.
• Long Life: Doesn't glaze or dull prematurely.
• Cool Running: Saves your metal from heat damage.
• Standard Fit: Works with any 4-1/2" grinder with a backing pad.