Walter Centering Pin for Annular Cutters

Keep Your Mag Drill Running Smoothly

If you run a magnetic drill, you know that the pilot pin is the unsung hero of the operation. The Walter Pilot Pin (48H535) is the part that makes sure you aren't fighting your tool all day. It starts by giving you a clear target—just line up the point with your center punch, and you know you're drilling in the right spot. No guessing, no walking, just a clean start every time.

But the real magic happens when you start cutting. This pin works as the on/off switch for your coolant. You don't want coolant spilling all over the shop floor before you even touch the metal. The Walter pin keeps the valve closed until you apply pressure, then lets the fluid flow right where it's needed: inside the cutter. This keeps your expensive annular cutters cool and sharp, saving you money on replacements and sharpening costs.

The best part? It saves you the headache of prying out stuck slugs. We've all been there—you finish a hole, lift the drill, and the slug is wedged inside the cutter. You have to stop, grab a pair of pliers or a screwdriver, and fight to get it out. With a fresh, straight Walter Pilot Pin, that spring-loaded action pops the slug out the second you punch through. It keeps your workflow moving so you can get the job done faster. Don't let a bent or worn-out pin slow down your fabrication work; keep a spare 48H535 in your kit.

Why You Need This Pin

• No More Stuck Slugs: strong ejection action clears the cutter instantly.
• Save Your Cutters: ensures coolant hits the teeth to prevent burning.
• Easy Starts: locate your hole center quickly and accurately.
• Direct Replacement: designed specifically for Walter annular cutter systems.