15D027 - Walter 7-Inch Orange Flexible Backing Pad Assembly 5/8-11

Tough Pad for Smooth Sanding

If you're running a 7-inch grinder with sanding discs, you know that the backing pad is the unsung hero of the operation. A cheap pad cracks, wobbles, or is just too stiff to get a good feel on the metal. The Walter 15D027 Backing Pad Assembly is built for the shop floor, designed to take a beating and keep coming back for more. It's made from a special impact-resistant plastic that doesn't shatter the first time you drop your grinder or snag an edge. This isn't just a piece of plastic; it's the foundation for your abrasive work.

This particular pad is the "Orange" model, which means it's got some give to it. Why does that matter? Because rarely is the metal you're working on perfectly flat. When you are blending a weld on a pipe, a tank, or a fender, you need the disc to flex with the curve, not fight against it. This pad gives you that "ultimate flexibility" Walter talks about, letting you feather out edges and blend surfaces without digging in or gouging the base metal. It makes the grinder feel smoother in your hands and helps you get that professional finish faster.

The assembly comes ready to rock with the 5/8-11 thread setup, so it screws right onto your standard 7-inch grinder spindle. It includes the nut you need to lock the sanding disc down tight. No hunting around for spare parts—just spin it on, slap on a fiber disc, and get to work. It holds the disc flat and secure, so you get the most out of your abrasives before you have to toss them. Whether you are stripping paint, grinding down a heavy weld, or prepping for polish, this pad gives you the control you need.

Stop wasting money on brittle pads that crack after a week. Upgrade to the Walter 15D027 and feel the difference a quality backing pad makes. It stays cool, it stays flexible, and it keeps your discs cutting the way they should. It's a small investment that saves you headaches and helps you turn out better work, shift after shift.