Walter Ripcut 18-Inch Abrasive Chop Saw Wheel

Smooth Cuts on Any Chop Saw

Every welder knows the frustration of a chop saw that bogs down right in the middle of a cut. The Walter Ripcut 18" Cut-Off Wheel is designed to solve exactly that problem. Whether you are working with a dedicated industrial saw or a standard shop machine that might not have the highest horsepower, this wheel is built to cut freely and fast. It bites into the metal immediately, allowing you to slice through steel and stainless steel structural shapes, tubing, and solids with ease.

The 10B183 is an 18-inch powerhouse that gives you the depth of cut needed for larger bundles and thick I-beams. Unlike cheaper abrasives that glaze over and require you to lean hard on the handle, the Ripcut breaks down its abrasive grains efficiently to keep fresh, sharp edges exposed. This means you don't have to fight the saw; you let the wheel do the work. The result is a cleaner cut with less heat buildup, which is critical when working with stainless steel to prevent discoloration and warping.

Versatility is key in a busy fab shop. You might be cutting heavy angle iron one minute and thin-wall tubing the next. The Ripcut handles both without grabbing or shattering the thinner material. It provides a stable, straight cut that lines up perfectly for your fit-up, saving you time on grinding and prep before you strike an arc. Upgrade your stationary saw with a wheel that respects your time and your equipment.