Walter 2-Piece Pilot Pin for 4-Inch Depth Annular Cutters

Drill Deeper with Confidence

When you are punching deep holes through thick steel, the last thing you want is a jammed slug or a wandering cutter. The Walter 05Z033 2-Piece Pilot Pin is your essential partner for heavy-duty magnetic drilling tasks requiring a 4-inch depth of cut. Standard pins just won't cut it when you are going that deep—this specialized 2-piece unit is designed to telescope and retract correctly inside your drill's arbor, ensuring you can tackle thick plate and structural beams without a hitch.

This pin does the hard work before and after the cut. First, it lets you line up your mag drill perfectly with your center punch mark. Once you trigger the drill, the pin retracts, opening the valve for coolant to flow right to the teeth where it's needed most, keeping your cutter cool and extending its life. Finally, when you break through the other side, the spring-loaded pin snaps back out, ejecting the hot metal slug instantly so you are ready for the next hole immediately. No more prying slugs out with a screwdriver or stopping work to clear a jam.

Built tough by Walter, this pin is hardened to resist bending and grinding wear. It fits perfectly with 3/4" Weldon shank setups and is the match for Walter's deep-cutting ICECUT and SST Core Cut bits. Keep a spare in your kit; it’s the small part that makes the big jobs possible.