Walter ICECUT 3/4-Inch x 2-Inch Annular Cutter with AICrN Coating

Walter ICECUT: The Ultimate Mag Drill Bit for Tough Jobs

When you are out in the field or in the shop fabricating heavy structural steel, you need a cutter that won't burn out halfway through the job. The Walter 05B312 ICECUT Annular Cutter (3/4" x 2") is built to handle the heat. Unlike standard bits that rely heavily on constant flood coolant to survive, the ICECUT features a special AICrN coating. This high-tech layer protects the bit from the intense heat generated when drilling hard metals like stainless steel, allowing you to cut faster and longer, even in vertical or overhead positions where using coolant is messy or impossible.

Why Choose ICECUT?

• Runs Cooler: The coating resists heat buildup, preventing the bit from softening and dulling prematurely.
• Cuts Faster: Advanced tooth geometry bites into the metal aggressively but smoothly, reducing the load on your drill motor.
• Universal Fit: The shank is designed to snap into almost any standard magnetic drill press, so you don't need special adapters.

This 3/4-inch diameter cutter with a 2-inch depth of cut is a workhorse for welders and fabricators. It clears chips effortlessly thanks to its large ground flutes, ensuring a clean hole every time. Whether you are drilling thick mounting plates, I-beams, or stainless tanks, the Walter ICECUT gives you the reliability you need to keep the project moving. Stop wasting money on cheap bits that snap or dull after a few holes—upgrade to the industrial durability of Walter Surface Technologies.