Walter 36mm Carbide Tipped Annular Cutter - 55mm Depth

Drill Faster and Last Longer on Tough Jobs

Stop burning through cheap bits when you're up against stainless steel or cast iron. The Walter 36mm Carbide Core Cut (05F236) is built to handle the heavy stuff that eats up regular HSS cutters. Whether you are drilling into thick plate, steel rails, or uneven surfaces on a job site, this carbide-tipped cutter powers through with less pressure required from the drill, saving your arms and your equipment. With a 55mm depth of cut, you can handle thick stock in a single pass without bottoming out.

The secret is in the carbide tips. Unlike standard steel bits that soften when they get hot, these carbide tips stay hard and sharp even under high heat. This means you can drill faster and get more holes done per hour. The specialized flute design clears chips out of the hole quickly, preventing binding and keeping the cutter cool. This is the go-to bit for welders working with magnetic drills who need reliable performance on stainless steel, alloys, and other hard metals.

Using the Walter Carbide Core Cut means cleaner holes with less burr, so you spend less time grinding and filing after the drill is done. It fits your standard magnetic drill setup and is ready to tackle the hardest materials in your shop or on the truck. When time is money and the metal is tough, trust Walter carbide to get the hole drilled right the first time.