Walter Pilot Pin for 1-1/2 Inch Depth Annular Cutters (< 3/4 Inch Dia)

Maximize Drilling Uptime with Walter Pilot Pins

Keep your magnetic drilling operations running smoothly with the Walter 05Z019 Pilot Pin. In the world of industrial metalworking and MRO, small accessories often make the biggest difference in productivity. This center pin is designed to fit Walter's range of high-performance annular cutters, specifically those with a 1-1/2 inch depth of cut and diameters smaller than 3/4 inch. It is fully compatible with popular Walter series including SST Core Cut, ICECUT, and CARBIDE core cutters.

The primary frustration in annular cutting is often a stuck slug. If the metal core remains wedged inside the cutter after the hole is finished, the operator must stop, lower the drill, and pry it out—risking injury and damaging the expensive cutter teeth. The Walter 05Z019 ensures reliable, automatic slug ejection every time. Its hardened steel body transfers the spring force effectively to pop the slug loose the moment the cut is complete, allowing for rapid cycling between holes.

Additionally, this pin is crucial for the longevity of your cutters. By acting as a valve for internal lubrication systems, it ensures that coolant is only dispensed when the drill is under load, preventing waste and mess while keeping the cutting edges cool. Whether you are fabricating structural beams or performing maintenance repairs, having a fresh, straight pilot pin is as important as having a sharp cutter. Replace worn or bent pins immediately with this genuine Walter replacement part to ensure safety and efficiency in your shop.