Walter Pilot Pin for 2-Inch Annular Cutters & Fein/Nitto Adapters

Keep Your Mag Drill Action Smooth and Jam-Free

Every welder knows that a magnetic drill is only as good as its accessories, and a bent or missing pilot pin can bring a job to a grinding halt. The Walter 05Z017 Pilot Pin is the replacement part you need to keep your 2-inch annular cutters running like new. Designed specifically for setups using Fein or Nitto adapters, this pin is the unsung hero of the hole-making process. It takes a beating so your expensive cutters don't have to, guiding them straight and true into the metal every single time.

Why is a high-quality pilot pin so important? First, it acts as your target. You line the tip of the pin up with your center punch, engage the magnet, and you know your bolt hole is going to be exactly where it needs to be. No walking, no guessing. Second, it manages the mess. As you drill, this pin allows coolant to flow down to the teeth where the heat is. But the real magic happens when you punch through. The spring-loaded pin pops that hot metal slug right out of the cutter. If you've ever wasted ten minutes fighting a stuck slug with a pair of pliers while your drill cools down, you know exactly why a fresh, straight pilot pin is worth its weight in gold.

This particular pin is made from hardened steel to resist bending and wear, ensuring it lasts through hundreds of holes. It is sized perfectly for 2-inch depth cutters, including the popular Walter Icecut and SST Core Cut lines. Don't let a small part cause a big delay in your fabrication shop. Keep a spare 05Z017 in your kit and ensure your mag drill is always ready to perform.

Key Benefits for the Shop

• Instant Alignment: pinpoint accuracy for bolt patterns.
• Automatic Ejection: no more prying out stuck slugs.
• Coolant Control: ensures lube gets to the cutting edge.
• Durable Build: hardened steel resists bending under pressure.