Walter SB-3 Aluminum Cut Carbide Burr 3/8-Inch Head

Walter SB-3 Aluminum Cut Carbide Burr

Maximize your productivity when working with aluminum and soft alloys using the Walter 01V058 SB-3 Carbide Burr. In the welding and fabrication industry, processing aluminum welds requires tools that don't gum up. This burr is designed with a robust, coarse pitch geometry specifically for non-ferrous applications. The open tooth design prevents the material from packing into the flutes, allowing you to grind longer and faster without stopping to clean the tool.

The SB-3 configuration (Cylindrical with End Cut) is a staple in any fabricator's toolbox. It provides the ability to smooth out surface welds, deburr edges, and clean up inside corners effectively. With a 3/8-inch head diameter, it offers a good balance between access to tight spaces and surface area coverage. The burr is precision-manufactured to ensure perfect balance, which is critical when running at high RPMs typical of pneumatic die grinders. This balance reduces the "hop" often felt with inferior burrs, giving you greater control and a smoother finish.

Key Applications:

• Grinding aluminum fillet welds and butt joints.
• Deburring non-ferrous castings and machined parts.
• Enlarging holes or slots in soft metals.
• Working with copper, brass, and bronze alloys.

Invest in Walter's superior carbide technology to reduce downtime and tool replacement costs. The 01V058 is built to withstand the heat and stress of industrial use, delivering consistent performance cut after cut.