01V606 - Walter Walter Carbide Burr Sc-3 Dc L6

Name: Walter Walter Carbide Burr Sc-3 Dc L6
Brand: Welders Helper
SKU: 01V606
Price: 72.17 CAD
Availability: InStock

Packaging: 1 per each

$82.16/ea $72.17/1 per each only $72.17/eaSave 12%

Save an additional $3.61 at checkout

Join the Nation of Welders Program

SKU: 01V606 Categories: Abrasives, Drill bits and Carbides

OVERVIEW

Reach Further and Grind Smoother

Every welder knows the frustration of trying to clean up a weld or deburr a hole that is just out of reach. The Walter 01V606 Carbide Burr is the solution to those headaches. With its extra-long 6-inch shank, this tool lets you get deep inside pipes, corners, and channels without losing control or visibility. It turns a difficult, knuckle-busting job into a quick and easy task.

This isn't just a long bit; it's a high-quality Walter tool. It features a "Double Cut" design, which means it has cross-cut flutes that chew through metal fast but leave a smooth surface. Unlike single-cut burrs that can grab and jump, this double-cut geometry gives you excellent control, making it easier to guide the tool exactly where you need it. The SC-3 shape (a cylinder with a rounded nose) is incredibly versatile, allowing you to grind flat surfaces or contour rounded fillets with the same tool.

Whether you are prepping a joint for welding, cleaning up slag in a tight spot, or deburring a drilled hole in a manifold, this burr stands up to the heat and stress of daily use. The tungsten carbide head stays sharp, saving you money on replacements and time on change-outs. Add this extended-reach burr to your die grinder kit and be ready for those hard-to-reach jobs.

Additional Information
Brand:Walter Surface Technologies
Packaging Description:1 per each
Shape:SC-3 (Cylindrical Radius End)
Cut Type:Double Cut
Shank Length:6"
Head Diameter:3/8"
Length Of Cut:3/4"
Material:Tungsten Carbide

INCLUDED

1x Walter Carbide Burr SC-3 Double Cut (6" Extended Shank)

APPLICATIONS

Deburring deep holes and internal diameters
Cleaning welds in hard-to-reach corners
Surface finishing in confined spaces
Enlarging holes and shaping metal
Removing material from castings and forgings

FAQ

The 'L6' indicates that this carbide burr has an extended shank length of 6 inches, allowing for greater reach compared to standard burrs.

Double cut burrs have cross-flutes that produce smaller chips and a smoother finish, offering better control and faster material removal than single cut burrs.

SC-3 refers to a Cylindrical shape with a Radius End (also known as Ball Nosed Cylinder). It typically measures 3/8" in diameter.

Yes, the tungsten carbide construction and double cut geometry make it excellent for use on stainless steel, as well as mild steel and other hard alloys.

This burr is designed for use with a pneumatic or electric die grinder that has a 1/4" collet (assuming standard shank diameter for this size).

You would choose an extended shank to reach areas that are inaccessible with standard length tools, such as deep inside pipes, engine blocks, or complex fabrications.

While specific RPM depends on the material, 3/8" carbide burrs generally run effectively between 20,000 and 25,000 RPM. Always check the manufacturer's safety rating, especially for extended shanks which may require lower speeds to prevent whipping.

Walter burrs are manufactured for high concentricity to minimize vibration. However, with any extended shank tool (6"), it is crucial to insert the shank fully into the collet and apply pressure carefully to avoid vibration or bending.