45233 - Pferd 1-1/2" x 1" Mounted Flap Wheel 80 Grit - 1/4" Shank

The Welder's Choice for Tight Spot Finishing

Every welder knows that the job isn't done until the cleanup is finished. The Pferd 1-1/2" x 1" Mounted Flap Wheel (80 Grit) is the perfect companion for your die grinder when you need to clean up welds in hard-to-reach places. While your 4-1/2" angle grinder is the workhorse for big flat surfaces, it simply can't fit inside small pipes, corners, or tight fabrication assemblies. That's where this mounted flap wheel shines.

Equipped with a sturdy 1/4" shank, this wheel locks securely into your die grinder collet. The 80 grit Aluminum Oxide grain is aggressive enough to knock down light spatter and smooth out bead ripples, yet fine enough to leave a clean, blended finish that looks professional. Because it uses a flap design rather than a solid stone, it offers a softer touch. This is crucial when you are blending a weld into the base metal; the flaps flex and give, allowing you to feather the edge perfectly without digging in or gouging the workpiece. It saves you time on rework and helps you turn out parts that look as good as they hold.

This wheel is a true "universal" abrasive. You don't need to swap wheels when switching between mild steel brackets and stainless steel tubing. The Aluminum Oxide A grain works effectively on all metals, including aluminum, without clogging up immediately like some cheaper abrasives. It runs cool, which helps prevent heat buildup and discoloration on stainless steel—a common headache during the finishing stage.

Whether you are prepping a surface for a critical weld, cleaning out the inside of a cut pipe, or putting the final polish on a custom railing, this Pferd flap wheel gives you the control you need. It wears evenly, exposing new grit as you work, so you get full value out of every wheel. Add a pack to your consumables drawer and stop struggling with tools that are too big for the job.