45271 - Pferd 2-1/2" x 1" Mounted Flap Wheel, 80 Grit, 1/4" Shank

Finish Strong with the Pferd 80 Grit Flap Wheel

When your 4-1/2 inch angle grinder is just too big for the job, the Pferd 45271 mounted flap wheel is the tool you reach for. Designed to fit any standard die grinder with a 1/4-inch collet, this 2-1/2 inch wheel gets you into tight corners, inside pipes, and around complex curves where other tools can't reach. Whether you are cleaning up spatter, blending a fillet weld, or smoothing out a rough edge on a fabrication project, this flap wheel gives you the control and finish you need without gouging the metal.

The 80 grit Aluminum Oxide abrasive is the perfect middle ground for welders. It is aggressive enough to knock down light imperfections and blend bead edges, but fine enough to leave a smooth, consistent finish that looks professional. Unlike solid grinding stones that can bounce and chatter, the flaps on this wheel flex and bend. This flexibility allows the wheel to hug the contour of your workpiece, giving you a soft touch and a blended finish that makes your work stand out. It wears down evenly, exposing fresh grain as you work, so you don't lose cutting power halfway through the job.

Pferd is known for making abrasives that last, and this mounted wheel is no exception. It holds up under the heat and stress of daily shop use. It works on just about anything you are welding—mild steel, stainless, or aluminum—so you don't need to swap out bits constantly. Pop this in your die grinder to clean up inside corners or prep surfaces for paint; it’s a must-have accessory for any serious fabricator's toolbox.

Ideal for Welders:

• Blending welds in tight corners and channels.
• Cleaning up inside pipes and tubing.
• Removing heat discoloration and light scale.
• Smoothing edges on custom fabrication parts.