06U606 - Walter Enduro-Flex Alu 6-Inch 60 Grit Flap Disc with Spin-On Hub

Name: Walter Enduro-Flex Alu 6-Inch 60 Grit Flap Disc with Spin-On Hub
Brand: Welders Helper
SKU: 06U606
Price: 191.60 CAD
Availability: InStock

Packaging: 10 per each

$30.66/ea $191.60/10 per each only $19.16/eaSave 38%

Save an additional $9.58 at checkout

Join the Nation of Welders Program

SKU: 06U606 Categories: Abrasives, Flap Disc

OVERVIEW

Stop Clogging, Start Grinding

Every welder knows the frustration of taking a grinder to aluminum. Within seconds, a standard flap disc gets gummed up with soft metal, stops cutting, and just starts generating heat. The Walter Enduro-Flex Alu™ 6-inch Flap Disc (06U606) is built to solve exactly that problem. Designed specifically for aluminum and other soft, gummy metals, this disc features a special top coating that acts as a lubricant. It keeps the disc cool and prevents the aluminum from sticking to the grains, so you can keep grinding without constantly stopping to change wheels or clean them out.

This 60-grit disc is perfect for knocking down TIG or MIG welds on aluminum structures, tanks, or boat hulls. It cuts fast but leaves a smooth finish that is easy to prep for paint or polishing. One of the best features for the daily user is the Eco-Trim™ backing. Usually, when the edge of a flap disc wears out, you toss it, wasting all the abrasive in the middle. With this Walter disc, you can simply trim the plastic backing against a piece of scrap metal to reveal fresh, unused grit underneath. It’s like getting three discs in one.

The 06U606 also comes with the Spin-On™ hub system. No more hunting for the pin wrench or fighting with a stuck locking nut. You just spin it on by hand, tighten it, and you are ready to work. It self-tightens as you grind and spins off easily when you're done. This system also centers the disc perfectly, cutting down on the vibration that leaves your hands numb after a long day of fabrication.

Why Welders Choose Enduro-Flex Alu:

No More Gumming: Cuts clean through aluminum without loading up.
Save Money: Trim the backing to use the whole disc, not just the edge.
Fast Changes: Spin-On hub means tool-free wheel changes in seconds.
Better Finish: 60 grit leaves a smooth, consistent surface ready for finishing.

Additional Information
Brand:Walter Surface Technologies
Diameter:6"
Grit:60
Used To Grind:Aluminum, Stainless or Aluminum
Packaging Description:10 per box
Arbor Type:Spin-On 5/8"-11
Grain Type:Zirconia Alumina
Backing Type:Eco-Trim Trimmable
Application:Aluminum Blending, Non-Ferrous Metals

INCLUDED

10 x Enduro-Flex Alu™ 6" Grit 60 Flap Discs
Integrated Spin-On™ Hubs

APPLICATIONS

Blending aluminum welds
Surface finishing on non-ferrous metals
Grinding heat-sensitive alloys
Marine and aerospace fabrication
Tank and vessel manufacturing
Architectural aluminum finishing

FAQ

The Enduro-Flex Alu™ features a special coating that prevents soft metals like aluminum from melting and clogging (loading) the abrasive grains, which is the common failure mode of standard discs.

The backing is made of a special plastic that can be trimmed away. As the abrasive flaps wear down on the edge, you can trim the backing to expose the fresh abrasive material in the center, extending the life of the disc up to 3 times.

No, the Spin-On system features a built-in 5/8"-11 threaded hub that allows you to tighten and remove the disc by hand, without the need for a pin wrench or flange nut.

Yes, the disc is free of iron, sulfur, and chlorine (less than 0.1%), making it safe for use on stainless steel and other alloys where cross-contamination must be avoided.

This specific SKU is a 60 Grit disc, suitable for medium stock removal and blending.

This is a 6-inch diameter disc.

While it can be used on steel, it is specifically formulated for aluminum. Using it on standard steel may wear the specialized coating faster than necessary; standard Enduro-Flex discs are recommended for steel.