Walter Coolcut 120 Grit Aluminum Oxide Cloth Sheet 9x11

Flexible Finishing for the Professional Fabricator

Every welder knows that power tools can't reach everywhere. When you are fitting up a pipe in a tight corner or need to clean the inside diameter of a cut piece, you need a reliable manual abrasive that won't fall apart in your hands. The Walter 14A912 Coolcut™ Sheet is the 120-grit workhorse your toolbox needs. Built on a tough, flexible cotton cloth backing, this abrasive sheet is designed to wrap around tubes, contour to irregular shapes, and withstand the twisting and pulling of vigorous hand sanding without tearing.

The 120 grit aluminum oxide grain is perfect for that intermediate stage of finishing. It is aggressive enough to knock down sharp edges and clean up heat tint or light spatter, but fine enough to leave a smooth, professional finish on your metalwork. If you are prepping a surface for TIG welding and need to ensure absolute cleanliness without gouging the base metal, this cloth sheet gives you the control you need. It is also excellent for polishing up shafts or cleaning threads where a grinder would be too aggressive or clumsy.

One of the biggest frustrations with cheap sandpaper is how quickly the grain strips off or the paper rips. Walter has solved this with their industrial-grade bonding and cloth construction. You can tear a strip off this 9x11 sheet, shoe-shine a pipe weld, and it will keep cutting long after other sheets would have gone smooth. Whether you are working on stainless steel handrails, aluminum tanks, or mild steel structural components, the Coolcut sheet helps you achieve that final touch of quality that separates a master fabricator from the rest.

Practical Shop Use

Keep a stack of these in your gang box or workbench. They are perfect for:

• Deburring cut pipe ends before fit-up.
• Cleaning oxidation off filler wire or base metal.
• Smoothing out minor scratches on finished surfaces.
• Removing rust from tools and equipment fixtures.