Walter ZIP TITAN 7-Inch Titanium and Brass Cutting Wheel

Stop Burning Your Titanium and Clogging on Brass

If you have ever tried cutting titanium with a standard zip wheel, you know the struggle. It gets hot, it turns blue, and the material fights you every inch of the way. And brass? It usually just clogs up your wheel until it stops cutting altogether. The Walter ZIP TITAN™ 7" x 1/16" Cutting Wheel (11H072) is built to solve exactly these problems. It is the wheel you grab when you need to cut expensive exotic metals without ruining the stock or wasting your time.

The secret is in the formulation. Walter has designed this wheel to cut incredibly cool. When you are working with titanium, heat is the enemy. Heat causes discoloration and changes the metal's temper, which can ruin a critical part. The ZIP TITAN™ slices through titanium alloys cleanly and quickly, keeping the heat in the sparks and out of your workpiece. This means you get a clean, bright cut with minimal burr and no heat-affected zone to grind out later. It saves you steps and saves you money on wasted material.

For those working with brass, this wheel is a game-changer because it doesn't load up. Standard wheels get gummed up with soft brass shavings, causing them to slip and overheat. The ZIP TITAN™ keeps cutting aggressively from the first spark to the nub. At 7 inches in diameter, this wheel gives you plenty of reach for larger pipe and plate, and the 1/16-inch thickness ensures a fast, precise cut that removes minimal material. It fits your standard 7-inch angle grinder with a 7/8" arbor.

Don't settle for "good enough" wheels that make your job harder. When the print calls for Titanium or Brass, equip your grinder with the Walter ZIP TITAN™. It’s tough, it’s fast, and it respects the metal you are working on. Experience the difference of a wheel that is actually made for the job at hand.