11T062 - Walter ZIPCUT 6-Inch Cut-Off Wheel Type 1 .045 Arbor 7/8

Cut Faster and Safer with the Walter ZIPCUT 6" Wheel

If you are tired of burning through cheap cut-off wheels that flex, shatter, or wear out after just a few cuts, it is time to upgrade to the Walter ZIPCUT 11T062. This isn't just another abrasive disc; it is widely considered the best cut-off wheel on the market by welders and fabricators who know their tools. With a 6-inch diameter, this wheel gives you that extra reach and cutting depth you need for bigger jobs, saving you from having to flip the material or switch to a torch.

The magic of the ZIPCUT lies in its .045-inch thin profile combined with Walter's patented rib technology. Most thin wheels get flimsy when they heat up, but the ZIPCUT stays rigid. The ribs on the side of the wheel act like cooling fins and stiffeners, keeping the wheel straight and cool even when you are pushing it hard. This means you get a razor-straight cut every time without the wheel binding up in the kerf. It cuts through steel and stainless steel like butter, leaving a clean edge that requires little to no deburring.

Safety is a huge priority in any shop, and Walter takes it seriously. These wheels are heavily reinforced to resist twisting and bending, which are the main causes of wheel failure. Plus, they are made with contaminant-free materials, so you can use them on stainless steel without worrying about rust or corrosion popping up later. Whether you are chopping angle iron, slicing through pipe, or cutting sheet metal, the 11T062 helps you get the job done faster and with less hassle.

Sold in packs of 25, these wheels come in a sturdy, moisture-resistant container that keeps them in top condition until you are ready to use them. Don't settle for less—equip your 6-inch grinder with a ZIPCUT and feel the difference immediately.