Skip to Main Content
Canadian
Canadian owned and operated

0333-0267 - Victor 5-GPP Propylene Cutting Tip, Size 5 (5-Inch Cut)

Packaging: pack of 1
$54.99/EA $38.12/pack of 1 only $38.12/EASave 31%

Usually ships within 3-5 business days

OVERVIEW

Victor 0333-0267 5-GPP: The Professional's Choice for Propylene Cutting

Upgrade your cutting setup with the Victor 5-GPP Cutting Tip, a premium consumable engineered for the specific demands of propylene gas. Identified by SKU 0333-0267, this Size 5 tip is a powerhouse for heavy industrial applications, capable of slicing through steel up to 5 inches thick. Victor Technologies has long been the gold standard in gas equipment, and the GPP series exemplifies their commitment to quality, offering superior flame stability and cut clarity for alternative fuel users.

Why Choose GPP Series Tips?

Propylene burns differently than acetylene, requiring a specific tip geometry to maximize heat transfer and prevent flame instability. The 5-GPP features a recessed tip face which protects the preheat flames and anchors them securely, even when the torch is moved rapidly or subjected to reflected heat. This specific design ensures that you get the most out of your fuel gas, providing a hot, concentrated preheat that starts cuts quickly and maintains them smoothly through thick plate.

Technical Excellence

This tip is built for rigorous use. It features a two-piece brass design that simplifies maintenance. If the preheat splines become fouled, the outer shell can be removed for direct access to the inner member, allowing for thorough cleaning without damaging the tip face.

  • Metal Thickness: 5 inches
  • Cutting Speed: 6/9 ipm
  • Oxygen Consumption: 330-360 cfh (Total)
  • Preheat Oxygen: 23-108 cfh

By adhering to the recommended pressure settings (50-55 psig for cutting oxygen), operators can achieve slag-free cuts that require minimal post-cut grinding.

Industrial Versatility

The Victor 5-GPP is an essential tool for General Fabrication, Structural Steel, and Repair & Maintenance sectors. It fits standard Victor professional torches (Large Series/300 Series), making it a versatile addition to any welder's toolkit. When precision, safety, and depth of cut matter, trust genuine Victor GPP tips to deliver consistent results shift after shift.

Additional Information
Brand:Victor
Item:Cutting Tip
Fuel Gas:Propylene
Cutting Capacity:5"
Fits Which Torch:Victor 300 Series
Packaging Description:1 per each
Tip Size:5
Tip Type:GPP (General Purpose Propylene)
Design:Two-Piece
Oxygen Pressure (Cutting):50-55 psig
Fuel Pressure:8-12 psig
Cutting Speed:6-9 ipm
Oxygen Consumption (Total):330-360 cfh
Fuel Consumption:20-30 cfh

INCLUDED

  • (1) Victor 5-GPP Propylene Cutting Tip

APPLICATIONS

  • Industrial and General Fabrication
  • Structural Steel Cutting
  • Heavy Equipment Repair and Maintenance
  • Scrap and Demolition
  • Shipbuilding and Offshore Construction

FAQ

The Victor 5-GPP (Size 5) cutting tip is designed to cut steel up to 5 inches (approximately 127 mm) thick.

This tip is specifically designed for use with Propylene gas. It is not suitable for Acetylene.

For optimal performance, set the Cutting Oxygen pressure to 50-55 psig and the Fuel Gas pressure to 8-12 psig.

No, this is a 'Large Series' tip designed to fit Victor 300 Series torch handles and cutting attachments. It will not fit the smaller 100 Series torches.

It is a two-piece tip, consisting of a brass inner member and a brass outer shell. This design is standard for alternative fuel tips to facilitate cleaning and optimize gas mixing.

When cutting 5-inch thick material, the expected cutting speed is between 6 and 9 inches per minute (ipm).

No, the 5-GPP is a cutting tip. For gouging applications, you would need a specific gouging tip designed for your torch and fuel gas.

You can separate the outer shell from the inner member to access the splines. Clean the splines with a soft wire brush or appropriate cleaning solution to remove soot and slag, then reassemble.