Victor CTF Fuel Gas Check Valve for Torch Handles

Don't Let Gas Flow the Wrong Way

When you are under the hood or handling a cutting torch, the last thing you want to worry about is gas backing up into your hoses. That's where the Victor 0690-0033 CTF Check Valve comes in. This little brass lifesaver is designed to keep your fuel gas moving in one direction: out to the tip. If you get a clog or a pressure drop that tries to push gas back down the line, this valve slams shut, stopping the reverse flow before it can cause a dangerous mix in your hose.

This specific model is the "CTF" version, which stands for Check Valve - Torch - Fuel. It mounts directly onto your torch handle's fuel inlet. Because it's for fuel (like Acetylene or Propane), it has the standard Left-Hand threads (remember: notches on the nut mean it's fuel). It's small and lightweight, so it won't throw off the balance of your torch or make it heavy to hold during long cuts. Victor has been making this gear for decades, so you know the internal spring and seat are going to work when you need them to.

Why do you need this?

Reverse flow is often the first step toward a flashback. If oxygen pushes back into your fuel hose (or vice versa), you have a bomb in your hand. A check valve stops that mixing from happening in the hose. It is a cheap insurance policy for your rig and your personal safety. Note that this is a check valve, not a flashback arrestor, but it is a critical part of your safety setup. Screw it on tight, check for leaks, and cut with confidence knowing your flow is going the right way.

Quick Specs:

• Fits: Standard Torch Fuel Inlets
• Gas: Fuel Only (Red/Orange Hoses)
• Build: Solid Brass