Canadian owned and operated
There is nothing more frustrating than grabbing your torch or MIG gun only to realize you can't read your gas pressure because the gauge is cracked, stuck, or missing entirely. The Techniweld C-200 is the perfect solution to get your gear back in fighting shape. This 1-1/2 inch replacement gauge is designed to fit the low-pressure side of most standard welding regulators, giving you a clear reading from 0 to 200 PSI. Whether you are running a small hobbyist setup or a heavy-duty industrial rig, having a working gauge is the only way to know you aren't wasting gas or starving your weld.
Welding is all about consistency, and consistency starts with your settings. If you are guessing your flow rate or pressure because your gauge is cloudy or broken, you are gambling with your weld quality. The C-200 features a crisp, easy-to-read dial that lets you dial in exactly the pressure you need. The 0-200 PSI range is ideal for the delivery side, giving you the resolution you need to make fine adjustments. Stop squinting at scratched lenses and swap in a fresh gauge to keep your parameters tight.
You don't need to be a certified millwright to install this gauge. It features a standard 1/8 inch NPT bottom mount thread, which is the most common size for regulator gauges. Just grab a wrench, unscrew the old busted unit (make sure the tank is off and drained first!), apply a little Teflon tape or thread paste to the new gauge, and screw it in. Remember to tighten it using the brass stem, not the round face, to avoid damaging the new unit. In five minutes, your regulator will look and function like new.
Shop tools take a beating, and regulators are often in the line of fire. This gauge is built with a sturdy case to handle the bumps and scrapes of daily shop life. It is a cost-effective way to extend the life of your regulator without having to buy a whole new assembly. Keep a couple of these C-200 gauges in your toolbox or maintenance locker, and you will never be shut down by a broken dial again. It works great for MIG, TIG, and other gas setups requiring low-pressure monitoring.
| Additional Information |
|---|
| Diameter:1.5" |
| Max Psi:200 |
| Used On A:Regulator |
| Packaging Description:1 per each |
| Connection Type:1/8" NPT |
| Mount Position:Bottom Mount |
| Pressure Range:0-200 PSI |
| Dial Size:1-1/2" |
| Used On Which Gas?:Inert Gases |
| Which Side?:Contents |
| Max Psi?:100psi |
