CS6290G2 - Harris Style 6290G-2 Acetylene Gouging Tip Size 2

High-Performance Harris Style 6290G-2 Gouging Tip

Maximize the efficiency of your oxy-acetylene gouging operations with the Victor Cutskill CS6290G2. This tip is a direct replacement for the Harris 6290G-2 and is engineered to deliver superior control and metal removal rates. Gouging with oxy-fuel is a technique that requires a specialized tip geometry to direct the oxygen stream in a way that washes metal away rather than cutting through it. The CS6290G2 features a specifically designed orifice and preheat arrangement that creates a soft, low-velocity oxygen stream, allowing the operator to control the depth and width of the groove with precision.

Constructed from high-conductivity copper, the CS6290G2 effectively dissipates heat, which is crucial when the tip is working in close proximity to the molten puddle. This thermal management helps prevent pre-ignition and flashback, common issues in heavy gouging applications. The Size 2 specification indicates its suitability for general-purpose gouging, capable of creating grooves of moderate depth and width in a single pass. It is an indispensable tool for welders needing to back-gouge root passes to sound metal or remove temporary attachments without damaging the base material.

The Victor Cutskill series represents a synthesis of value and industrial-grade performance. Each tip undergoes rigorous quality control to ensure concentricity of the gas ports and smoothness of the bore. This attention to detail results in a stable preheat flame and a non-turbulent cutting oxygen stream, which are vital for producing smooth, clean grooves that require minimal secondary cleanup. When paired with a properly adjusted Harris style torch, this tip provides the operator with excellent visibility and control, reducing operator fatigue and increasing throughput.

Technical Specifications & Usage:

• Gas Service: Acetylene and Oxygen.
• Tip Style: 6290G (Gouging).
• Size: #2.
• Material: Copper.
• Compatibility: Fits all standard Harris style cutting torches and attachments.

Ensure your equipment is set to the correct pressures for a Size 2 gouging tip to achieve optimal results. Always inspect the tip seating surfaces and O-rings (if applicable to the torch design) before installation to maintain a safe operating environment.