Victor Cutskill 6290-00 Harris Style Acetylene Cutting Tip, Size 00

Reliable Cutting Performance for Your Harris Torch

When you're in the middle of a job and your torch tip gets clogged or worn out, you need a replacement that fits right and cuts clean. The Victor Cutskill CS629000 is your go-to solution for Harris-style torches. This is a Size 00 tip, which is the perfect sweet spot for a lot of general fabrication work. It is rated to cut steel up to 3/8 of an inch thick, making it ideal for cutting sheet metal, brackets, light structural frames, and automotive parts. If you are running an oxy-acetylene rig, this tip gives you the focused heat and sharp cutting stream you need to drop parts quickly and move on to the next weld.

We know that in the shop, "compatible" needs to mean "works perfectly." The CS629000 is built by Victor, a brand synonymous with gas equipment, specifically for the Cutskill line to offer great value without sacrificing performance. It features the classic one-piece copper design that Harris users are used to. Copper is tough and handles the intense heat of the acetylene flame without warping or degrading quickly. The seating end is machined to exact tolerances, so when you tighten that tip nut, you get a solid seal—no hissing, no leaks, just a steady flame.

Using the CS629000 is straightforward. It installs just like your original Harris tips. Once seated, dial in your oxygen and acetylene pressures (typically around 3-5 psi for fuel and 20-25 psi for cutting oxygen for this size), and you'll see a crisp preheat cone. The cutting stream is tight and powerful, blowing through 3/8" plate with ease and leaving a edge that requires minimal grinding. It's a general-purpose workhorse that belongs in every welder's toolbox.

Don't let a bad tip ruin your cut quality or slow you down. Slag buildup, erratic flames, and popping are signs it's time to swap out. The Victor Cutskill CS629000 gives you a fresh start with a brand-new orifice and clean gas paths. It’s an affordable way to keep your Harris torch running like new. Remember, this tip is designed strictly for Acetylene gas; if you are running propane, you'll need a different style. For the traditional oxy-acetylene cutter, this size 00 tip delivers the reliability you expect from the Victor name.