Skip to Main Content
Canadian
Canadian owned and operated

1407-0025 - Victor Replacement O-Ring .489 ID x .070 W Buna-N

Packaging: pack of 1
$16.41/EA $10.72/pack of 1 only $10.72/EASave 35%

Usually ships within 3-5 business days

OVERVIEW

Keep Your Torch Running Leak-Free

There is nothing more frustrating than hearing that tell-tale hiss of a gas leak when you are trying to set up your torch, or noticing your regulator pressure creeping up. Often, the culprit is a simple, worn-out O-ring. The Victor 1407-0025 O-Ring is the exact replacement part you need to fix those leaks and get back to work. Made from durable Buna-N material, this O-ring is tough enough to handle the rigors of daily shop use while maintaining the flexibility needed to create a tight, secure seal every time you tighten down your connections.

This isn't just a generic hardware store O-ring; it is a genuine Victor part sized specifically for your gear. With an ID of .489" and a width of .070", it fits perfectly into the machined grooves of compatible Victor torches and regulators. Using the wrong size O-ring can lead to pinched seals, frustration, and dangerous leaks. By sticking with the OEM part, you ensure that your equipment assembles easily and holds pressure correctly. It’s a small part, but it does a huge job in keeping your flame stable and your shop safe.

Every welder knows that maintenance is key to quality work. Old O-rings can dry out, crack, or flatten over time, especially in environments with fluctuating temperatures and exposure to shop grime. Keeping a few of these 1407-0025 O-rings in your toolbox is a smart move. It means that when a seal fails in the middle of a job, you aren't stuck waiting for parts or trying to make a mismatched seal work. You can swap it out in minutes and get back to laying beads or cutting steel.

Whether you are doing a full rebuild on an old torch body or just swapping out a seal during a bottle change, this Buna-N O-ring gives you peace of mind. It resists oil and grease, which are common in any workshop, ensuring the seal lasts longer. Don't let a ten-cent seal cause a hundred-dollar delay. Grab the right part for your Victor equipment and keep your oxy-fuel setup performing at its best.

Additional Information
Material:Buna-N (Nitrile Rubber)
Inner Diameter:0.489"
Outer Diameter:0.625"
Cross Section Width:0.070"
Brand Compatibility:Victor
Product Type:Replacement O-Ring
Pack Quantity:1
Packaging Description:pack of 1

INCLUDED

  • 1 x Victor 1407-0025 Buna-N O-Ring

APPLICATIONS

  • Replacement seal for Victor welding torches and cutting attachments.
  • Sealing component for Victor gas regulators and flowmeters.
  • Maintenance of gas mixing chambers and connections.
  • General repair of compatible oxy-fuel gas apparatus.

FAQ

The O-ring has an Internal Diameter (ID) of 0.489 inches, an Outer Diameter (OD) of 0.625 inches, and a cross-section width of 0.070 inches.

It is manufactured from Buna-N (Nitrile rubber), which is known for its resistance to oils, greases, and various fuels.

Yes, this is a genuine OEM replacement part manufactured by Victor Technologies (ESAB).

It is designed to fit specific Victor gas apparatus, including certain models of torches, regulators, and cutting attachments. Check your equipment's parts diagram for the 1407-0025 part number.

O-rings should be inspected regularly for signs of wear, cracking, or flattening. They should be replaced immediately if a leak is detected or during routine annual maintenance.

It is highly recommended to use the specific OEM part. Generic O-rings may not have the exact dimensional tolerances or material compatibility required for safe gas service.

Buna-N is generally compatible with oxygen at lower pressures, but cleanliness is critical. Always ensure the part is clean and intended for the specific location in the oxygen stream as per the manufacturer's design.

Typically, these O-rings are supplied dry. If lubrication is needed for installation, use only a lubricant compatible with the gas service (e.g., oxygen-safe lubricant for oxygen service).