Victor ST2611FC 27-Inch 75-Degree Heavy Duty Straight Torch

The Professional's Choice for Heavy Cutting

When you are out in the field or deep in the scrap yard, you need a torch that can take a beating and keep on cutting. The Victor 0381-1491 ST2611FC is built exactly for that purpose. This 27-inch straight cutting torch gives you the leverage and reach you need to cut through thick steel while keeping your hands away from the intense heat. The 75-degree head angle is a favorite among many welders and cutters because it offers a more natural wrist angle for certain ground-level cutting or overhead work compared to the standard 90-degree heads. Whether you are severing I-beams or processing scrap metal, the balance and feel of this Victor torch are unmatched.

Built-In Safety, Less Bulk

Forget about screwing on bulky external flashback arrestors that throw off the balance of your torch. The ST2611FC features Victor's legendary VanGuard technology with built-in flashback arrestors and reverse flow check valves right inside the torch body. This means you get maximum protection against flashbacks without the extra weight hanging off your inlet connections. It’s a streamlined design that keeps you safe without slowing you down. If a flashback does occur, the internal arrestors are easily serviceable, ensuring your torch has a long operational life.

Fuel Flexibility and Control

This torch is a true multi-fuel workhorse. Whether your shop runs on Acetylene, Propane, or Natural Gas, the ST2611FC handles it all. You just need to swap in the correct Series 1 cutting tip for your gas and metal thickness. The top-rear cutting oxygen lever gives you smooth, progressive control over the cut, allowing for clean starts and minimal slag. Rated to cut up to 8 inches of steel, this isn't just a torch; it's a primary tool for serious fabrication and demolition work. The stainless steel tubes and die-forged brass head ensure that this torch will remain a staple in your rig for years to come.