DHC-2000-W3044-240 - Cobra DHC-2000 Replacement Tip #P-3 for Propane Welding

Get the Most Out of Your DHC-2000 with Propane

If you are running a DHC-2000 (or an older Henrob/Dillon), you already know it's not your average torch. It's a precision instrument that lets you weld aluminum with a gas torch and cut steel like a plasma cutter. But to really unlock its potential—and save a bundle on gas—you need the right tips. The Tip End #P-3 Oxy/Propane is designed specifically for guys who want to burn propane for welding and heating heavier materials.

Why propane? It's cleaner, it's cheaper, and with the DHC-2000's mixing technology, it welds beautifully. The #P-3 tip is your workhorse for the medium-to-heavy stuff. Whether you are welding up a custom exhaust, repairing a cast iron manifold, or doing some heavy brazing, this tip puts out the BTUs you need without blowing the puddle away. Because the DHC system runs at a super-low 4 PSI, you get a soft, focused flame that wraps around the metal rather than blasting through it.

Key Benefits for the Shop:

• Cost Savings: Stop burning through expensive acetylene tanks. This tip lets you do serious welding with cheap propane.
• Control: The P-3 gives you a larger heat zone than the fine tips, making it perfect for pre-heating or welding thicker plate (1/8" and up).
• Durability: Made from solid copper alloy, it stands up to the heat. Just keep it clean, and it will last for years.

Don't try to force a standard acetylene tip to do a propane tip's job. The flow rates are different. This P-3 tip is drilled and shaped to keep that propane flame neutral and hot. It’s easy to install—just hand tighten it onto the extension, and you are ready to go. If you are doing restoration work, farm repairs, or custom fabrication, keeping a fresh P-3 tip in your kit ensures you are ready for the bigger jobs that walk through the door.