Skip to Main Content
Canadian
Canadian owned and operated

Uniweld T-4 Propane Twister Tip for TurboTorch Handles

$178.40/ea $118.93/1 per each only $118.93/eaSave 33%

In stock

OVERVIEW

Get the Job Done: Uniweld T-4 Twister Tip

For plumbers and HVAC technicians who demand speed and reliability, the Uniweld T-4 Twister Tip is the go-to upgrade for your torch kit. If you are tired of struggling with standard tips that blow out in the wind or take forever to heat up a joint, the T-4 is your solution. This tip uses Uniweld's famous Twister technology to create a swirling flame that acts like a heat wrap for your pipes. Instead of just hitting one spot, the flame curls around the copper, heating the entire joint evenly and quickly. This means you can melt your solder and flow your silver braze faster, getting you on to the next fitting in record time.

The T-4 is designed specifically for Propane and Propylene (MAP-Pro) gases, which are cleaner and often more readily available than Acetylene. It is the perfect size for the most common jobs you face daily—soldering water lines up to 1-1/2 inches or brazing refrigerant lines up to 3/4 inch. The flame is hot, stable, and controllable, giving you the confidence to work in tight spaces without overheating sensitive components nearby. Plus, the rugged stainless steel construction means this tip can handle the rough-and-tumble environment of a tool bag or truck bed without getting crushed or bent.

One of the best features of the T-4 is its versatility. You don't need to buy a whole new torch setup to use it. It fits right onto your existing Uniweld handles and is fully compatible with TurboTorch X-4B, TH6, and similar handles you likely already own. Just snap it in, light it up, and experience the difference a swirl flame makes. Whether you are doing a residential install or a commercial repair, the Uniweld T-4 helps you produce leak-free, professional-looking joints with less hassle and less fuel waste.

Stop wasting time with inferior flames. Upgrade to the Uniweld T-4 Twister Tip and feel the power of a true performance tool. It’s built for the tradesman who knows that time is money and quality is non-negotiable.

Additional Information
Brand:Uniweld
Fits Which Handle:TurboTorch X-4B or Uniweld TH6, 8, 7 Handle
Fuel Gas:Propane
Item:Heating Tip
Packaging Description:1-per-each
Tip Size:#4
Flame Type:Swirl Combustion, Twister
Compatible Gases:Propane, Propylene, MAP-Pro
Application Process:Air-Fuel Soldering, Air-Fuel Brazing
Target Tubing Size (Soldering):Up to 1-1/2 inch
Target Tubing Size (Brazing):Up to 3/4 inch
Oxy Press:N\A
Fuel Press:N\A
Weld Cap Or BTU/HR:N\A
Fuel/gas:Propane

INCLUDED

  • 1 x Uniweld T-4 Twister Tip (Lp)
  • 1 x O-Ring (Pre-installed)
  • 1 x Instruction Card

APPLICATIONS

  • Soft soldering copper pipes for plumbing (up to 1.5 inches)
  • Silver brazing HVAC refrigerant lines (up to 0.75 inches)
  • Heating seized nuts and bolts
  • General metal heating and fabrication
  • Automotive applications requiring localized heat
  • Field repairs in windy conditions

FAQ

The T-4 Twister Tip is designed for use with LP gases, specifically Propane and Propylene (MAP-Pro). It is not designed for Acetylene.

Yes, the Uniweld T-4 is compatible with TurboTorch handles such as the X-4B, TH6, TH8, and TH7, as well as Uniweld's own quick-connect handles.

The Twister flame utilizes a helical blade to create a swirl action. This stabilizes the flame in wind and wraps the heat around the pipe for faster, more even heating.

The T-4 is generally rated for soft soldering copper tubing up to 1-1/2 inches in diameter.

Yes, the T-4 is suitable for silver brazing copper tubing, typically up to 3/4 inch in diameter, depending on the alloy and conditions.

The tip is a separate component and can be easily replaced or swapped out on your existing compatible handle.

Yes, the tip typically comes with the necessary O-ring pre-installed for a secure seal against the handle.

While Acetylene burns hotter, the T-4 with Propylene provides a very high heat transfer rate due to the swirl design, making it highly efficient for most plumbing and HVAC tasks without the soot of Acetylene.
Google Rating
4.9
Based on35reviews
×
js_loader