1000-0264 - Victor FM200 CO2 Station Flowmeter, 30-100 SCFH, 1/4 NPT Inlet

Reliable Shielding Gas Control for Your Weld Station

Upgrade your welding station with the Victor FM200 CO2 Flowmeter Regulator, a trusted choice for professional welders working in shops with piped gas systems. When your shielding gas comes from a bulk tank or manifold, you need a regulator designed to handle the specific lower line pressure of those systems. The FM200 is calibrated for 80 PSIG inlet pressure, ensuring that your gas flow is consistent and reliable from the moment you strike an arc.

Built Tough for the Shop Floor

We know that welding shops can be tough on gear. That's why the Victor FM200 ditches fragile glass tubes in favor of impact-resistant Lexan. Whether it takes a knock from a workpiece or a bump during setup, this flowmeter is built to survive. The clear scale is easy to read, allowing you to dial in your CO2 flow between 30 and 100 SCFH quickly. This range is perfect for a wide variety of MIG and flux-cored applications where higher flow rates of CO2 are often required for adequate coverage.

Consistent Welds, Every Time

Inconsistent gas flow leads to porosity and rework. The FM200 features pressure compensation technology that maintains a steady flow rate even when you move the cable or if there's minor back-pressure from the gun nozzle. This means you get the coverage you set, without the surges that waste gas or the drops that ruin welds. It connects easily to your station drop with a standard 1/4" NPT thread and fits your standard gas hose.

Why Choose the FM200?

• Durability: Virtually unbreakable Lexan tube design.
• Precision: Calibrated specifically for CO2 at shop line pressures.
• Safety: Integrated overpressure protection keeps you safe.
• Performance: Delivers the high flow rates (up to 100 SCFH) needed for heavy fabrication.