1424=0380 - Victor 2-Inch Oxygen High Pressure Gauge 4000 PSI 1/8 NPT

Get Your Regulator Back in Action

A broken gauge on your oxygen regulator isn't just an annoyance; it's a safety hazard and a work stopper. The Victor 1424-0380 2-inch High Pressure Oxygen Gauge is the reliable solution to get your oxy-fuel rig back up and running. Designed to measure the high-pressure side of your regulator (the cylinder contents), this gauge reads up to 4000 PSI, covering the standard pressures found in full oxygen tanks (usually around 2200-2400 PSI) with plenty of headroom for safety.

Clear and Readable: When you are under the hood or managing a flame, you need to know your gas levels at a glance. This gauge features a crisp white face with bold markings. It displays pressure in both PSI (0-4000) and kPa (0-27000), making it useful regardless of which measurement system your shop prefers. The 2-inch size is the industry standard—large enough to read easily without being bulky or getting in the way of the regulator handle.

Universal Fit: While it is a genuine Victor part, the 1/8-inch NPT thread is a common standard used on many brands of welding regulators. If your regulator accepts a 1/8-inch thread for the high-pressure port, this gauge is likely a perfect fit. It screws in securely to provide a leak-free seal (always use approved PTFE tape or paste designed for oxygen service when installing).

Safety First: Oxygen equipment requires components that are specifically cleaned and designed for oxygen service to prevent hazardous reactions. This Victor gauge is built to these strict standards. Don't risk using a generic hydraulic or air gauge on your oxygen tank. Stick with trusted welding brands like Victor to ensure the safety of yourself and your shop. Keep a spare in your toolbox so a cracked lens or stuck needle never shuts down your cutting torch again.