Skip to Main Content
Canadian
Canadian owned and operated

0560957503 - ESAB 3-Pole Contactor 24V Coil Replacement Part

Packaging: pack of 1
$1,535.55/EA $920.01/pack of 1 only $920.01/EASave 40%

Usually ships within 3-5 business days

OVERVIEW

Restore Your Welder's Performance

Is your welding machine humming but refusing to strike an arc? Or perhaps the wire feeds, but there is no welding output? These are classic symptoms of a failed contactor. The ESAB 0560957503 3-Pole Contactor with a 24VAC coil is the essential replacement component needed to get your equipment back in fighting shape. As the main relay for your welder's power source, the contactor endures significant electrical stress every time you pull the trigger. After thousands of cycles, the mechanical and electrical components can degrade, necessitating a replacement.

This unit is a 3-pole device, meaning it has three sets of contacts that close simultaneously when the electromagnetic coil is energized by 24 volts AC. This configuration is critical for three-phase welding machines, where all three phases of input power must be engaged at the exact same moment to prevent "single-phasing" the transformer, which can cause catastrophic damage. It is also robust enough for high-amperage applications, providing a low-resistance path for the welding current to flow, ensuring you get the full power your machine is rated for at the arc.

Installation is straightforward for qualified repair technicians. The unit features clearly marked terminals for line and load connections, as well as the coil control wires. By using this genuine-style replacement, you ensure that the coil resistance and pull-in voltage match your machine's design specifications, preventing issues like coil burnout or contact chatter. Don't let a faulty $50 part sideline a $5,000 machine. Keep your fabrication line moving with this reliable, industrial-grade contactor.

Troubleshooting Tips

If you suspect your old contactor is bad, listen for the "click" when the trigger is pulled. If it clicks but you have no output, the contacts inside may be charred. If it doesn't click, check for 24VAC at the coil terminals. If voltage is present but it won't close, the coil is likely open, and this replacement is exactly what you need.

Additional Information
Brand:ESAB
Voltage:24 V
Packaging Description:1 Per Ea
Component Type:Contactor
Poles:3
Coil Voltage:24 VAC
Phase:3-Phase

INCLUDED

  • 1 x 3-Pole Contactor with 24VAC Coil

APPLICATIONS

  • Repairing ESAB welding power sources
  • Replacing worn or stuck contactors in industrial machinery
  • Switching 3-phase power in compatible control systems
  • Maintenance of MIG, TIG, and Stick welding machines

FAQ

This contactor features a 24VAC coil, which is a common control voltage for many industrial welding machines.

Signs of a bad contactor include the machine not welding despite the fan running, the machine staying 'hot' (output active) without the trigger pulled, or a loud buzzing noise coming from the contactor itself.

While it is a 3-pole contactor designed for 3-phase power, it can sometimes be used in single-phase applications if the machine was designed to use a 3-pole contactor to break both legs of power or distribute load. Always check your machine's schematic.

This item is identified by the ESAB part number 0560957503 and is intended as a direct replacement for the original component.

3 Pole means the contactor has three separate internal switches that open and close simultaneously, allowing it to control three separate electrical lines (phases) at once.

Usually, the contactor controls the welding arc power, not the wire feed motor. However, if the contactor is part of the main power distribution, failures can sometimes affect other systems. It is primarily for fixing 'no arc' or 'stuck arc' issues.

Some discoloration is normal, but if the points are deeply pitted, melted, or have heavy carbon buildup that prevents continuity, the contactor should be replaced.

Ensure the machine is unplugged and capacitors are discharged. Label all wires before removing the old unit. Connect the power wires to the line/load terminals and the control wires to the coil terminals, matching the original configuration.