K4130-14 - AutoDrive SA Robotic Cable Assembly for ABB 2600ID

Keep Your Robot Running Smoothly

When your robotic welding cell goes down, every minute counts. The Lincoln Electric K4130-14 AutoDrive SA Cable Assembly is the direct replacement part you need to get your ABB 2600ID-15/185 system back to striking arcs. Designed for the AutoDrive SA (Servo Assist) system, this cable isn't just a bundle of wires—it's the lifeline that connects your push feeder to the torch assembly. In robotic applications, cables take a beating. They twist, flex, and rub thousands of times a shift. If you are seeing communication faults, erratic wire feeding, or intermittent power loss at the torch, a compromised cable assembly is often the culprit. Swapping it out with this genuine Lincoln part ensures you eliminate the variable of bad connections.

This specific assembly is tailored for the ABB 2600ID series. The "ID" stands for Integrated Dressing, meaning the cable pack is routed through the robot's arm rather than swinging loosely on the outside. This design protects the cable from weld spatter and collision, but it also means the cable must be perfectly sized and constructed to handle the tight bend radii inside the arm. The K4130-14 is engineered with high-flex materials that resist fatigue, preventing the internal copper conductors from breaking under the stress of constant multi-axis movement. It features robust connectors that lock securely into the AutoDrive components, resisting vibration and ensuring a low-resistance electrical path.

For welders and maintenance techs managing automated lines, fit-up is everything. Because this is an OEM Lincoln Electric part, you don't have to worry about re-pinning connectors or splicing wires. It plugs directly into the AutoDrive SA architecture. This is particularly important for Servo Assist systems, where the synchronization between the push motor and the pull motor (if equipped) or the robot motion is critical for preventing bird-nesting and burn-backs. Don't risk your weld quality with aftermarket knock-offs; stick to the spec with the K4130-14 and keep your bead profile consistent and your spatter low.