20352114 - Tweco 4-Pin Control Plug for Miller MIG Guns

Fix Your Trigger Connection Fast

There is nothing worse than pulling the trigger on your MIG gun and getting nothing but silence. Often, the culprit isn't the gun itself, but a smashed or frayed control plug where it connects to the machine. The Tweco 2035-2114 Control Plug Assembly is the standard replacement part you need if you are running a Tweco-style gun on a Miller welder. This is the classic 4-pin "Amphenol" style plug that screws onto the front of most Miller wire feeders to tell the machine when to feed wire and energize the contact tip.

This kit comes with everything you need to replace a broken plug or put a new end on a control cable. It includes the hard plastic shell, the insert, the pins, and the cable clamp. The housing is built tough to survive getting stepped on or dragged across the shop floor, which we all know happens. The threaded locking ring ensures it stays tight against the machine, so you don't lose connection in the middle of a bead. If your current plug is taped together or has exposed wires, it's time to swap it out before it shorts out your board or stops working entirely.

Wiring it up is standard procedure—usually, you only use two of the four pins for the trigger circuit on a standard MIG setup, but the 4-pin housing is required to fit the Miller receptacle. It's a smart part to keep in your spare parts bin because plastic plugs are often the first thing to break when a machine gets moved or a cable gets yanked too hard. Get your rig back up and running with a solid connection that won't let you down.

Practical Features

• Fits Miller Feeders: Matches the standard 4-pin trigger port found on most Miller shop machines.
• Complete Kit: Comes with the shell, pins, and strain relief clamp.
• Field Repairable: easy to solder or crimp new connections to get back to work.