0416749981 - ESAB GMH Automation Control Cable - 22m Length

Extend Your Reach with Confidence

When you are running an automatic welding rig, you know that the equipment is only as good as the connections that tie it all together. The ESAB Control Cable GMH is the lifeline between your control box and the welding head. This specific version comes in at 22 meters (roughly 72 feet), giving you the freedom to set up your track and carriage exactly where the work is, without being tethered on a short leash to the power source. If you've been struggling with cables that are just a few feet too short, or if you're seeing intermittent signal faults because of a beat-up old cable, this is the direct replacement you need to get back to smooth running.

We know that cables on a shop floor take a beating. They get dragged over concrete, stepped on, and showered with sparks. That's why ESAB builds these control cables with a tough protective sheath designed to handle the abuse. It resists cuts and abrasion, keeping the delicate signal wires inside safe. This cable handles the communication for things like joint tracking and travel speed, so keeping it in good shape is critical for weld quality. If your current cable has taped-up spots or loose connectors, you're risking a mid-weld failure that could cost you time and rework.

Swapping this out is straightforward—it comes with the correct industrial connectors pre-installed for ESAB GMH systems. You won't have to mess around with pin-outs or soldering; just route the cable, plug it in, and lock the connectors down. It’s designed for the A2/A6 automation series and GMH heads, ensuring that every command from your controller is executed perfectly at the arc. Don't let a bad cable compromise your automated welds; upgrade to a fresh, long-reach ESAB control cable and keep your production line moving efficiently.