Skip to Main Content
Canadian
Canadian owned and operated

0445550881 - ESAB ER 1F TIG Foot Pedal with 5m Cable and 6-Pin Plug

Packaging: pack of 1
$1,492.23/EA $946.99/pack of 1 only $946.99/EASave 37%

Usually ships within 3-5 business days

OVERVIEW

Master Your TIG Arc with the ESAB ER 1F Foot Pedal

In the world of TIG welding, control is everything. The difference between a perfect stack of dimes and a blown-through hole often comes down to how well you can manage your heat input. The ESAB ER 1F Foot Control is designed to give you that mastery. By moving the amperage control from the machine panel to your foot, you gain the ability to dynamically adjust your welding power in real-time. This is crucial when you are welding materials that heat up quickly, like aluminum, or when you are navigating changes in material thickness or joint geometry. With the ER 1F, you can blast the amps to get a puddle established instantly, then back off to a lower amperage to run your bead, and finally taper off gently to fill the crater without cracking.

Built for the Welder's Workflow
We know that welding doesn't always happen right next to the power source. That's why this pedal comes equipped with a generous 5-meter (16.4 ft) cable. This extra length gives you the freedom to set up your workspace exactly how you need it, whether you are working at a bench or around a large fixture, without dragging the welder along with you. The 6-pin connector plugs securely into your compatible ESAB machine, ensuring a reliable connection that won't wiggle loose in the middle of a critical pass.

Comfort and Durability
Spending all day at the bench can take a toll on your ankles if your equipment isn't up to par. The ER 1F features an ergonomic design with a smooth pivot action that reduces leg strain, allowing you to focus on the puddle rather than your posture. The rugged housing is built to withstand the inevitable knocks and drops of a busy shop environment, and the non-slip surface ensures your foot stays exactly where you put it. Whether you are a seasoned pipe welder or a fabricator looking for better precision, adding this foot control to your ESAB setup is an upgrade that pays for itself in weld quality and ease of use.

Additional Information
Brand:ESAB
Accessory Type:Foot Control
Cable Length:5m
Connector Type:6-Pin
Connection Type:6-Pin
Control Type:Remote Amperage & Contactor
Packaging Description:pack of 1

INCLUDED

  • 1x ER 1F Foot Control Pedal
  • 1x 5-Meter (16.4 ft) Control Cable
  • 1x 6-Pin Connector Plug

APPLICATIONS

  • Precision TIG (GTAW) Welding
  • Aluminum Fabrication
  • Stainless Steel Pipe Welding
  • Aerospace Component Repair
  • Automotive Exhaust Fabrication
  • Thin Gauge Sheet Metal Work

FAQ

The cable is 5 meters long, which is approximately 16.4 feet.

It uses a 6-pin connector plug designed for specific ESAB machines.

No, the pedal signals the machine to open the gas solenoid; the gas flows through the torch, not the pedal.

No, it is specifically designed for ESAB welders that accept a 6-pin remote control connection.

Yes, pressing the pedal activates the contactor to start the arc and then increases amperage as you press further.

The ER 1F typically features a rugged industrial housing suitable for shop environments.

While technically possible on some machines to control amps, foot pedals are primarily designed for TIG welding applications.

The internal part number is 0445550881.