2075539 - ESAB 1-1/2" OD V-Groove Drive Roll for 1/16" Wire

Keep Your Wire Running Smoothly

There is nothing more frustrating than a wire feeder that slips, stutters, or jams right in the middle of a bead. Often, the culprit isn't the machine or the liner—it's a worn-out drive roll. The ESAB 2075539 Feed Roll is the direct replacement you need to get your machine back to feeding like new. Designed with a 1-1/2 inch outer diameter and a V-groove profile, this roll is built to handle 1/16-inch solid wire (like your standard mild steel or stainless MIG wire) with ease.

Why does the groove shape matter? A V-groove acts like a track for hard wires, gripping them on two sides to push them through the gun cable effectively. If you try to use a knurled roll on solid wire, you'll chew it up and clog your liner with shavings. If you use a U-groove, you might not get enough grip. This V-groove roll hits the sweet spot, giving you positive traction without crushing the wire. This means you don't have to crank down the tension knob, saving your drive motor and preventing those nasty bird-nests at the feeder inlet.

This roll is a genuine ESAB part, meaning it’s made of hardened steel to resist wear and tear in tough shop environments. Whether you are fabricating heavy structural steel or running high-production manufacturing, consistent wire speed is key to a good weld. Don't let a slipping drive roll ruin your arc starts or cause porosity. Swap out your old, grooved-out rollers with this fresh ESAB 2075539 unit and notice the difference immediately. It’s a small investment that saves a lot of headaches and downtime on the floor.