0334322001 - ESAB 24V 110RPM Slide Motor Replacement

Get Your Rig Back on Track

When your automated welding setup goes down, production stops, and deadlines start slipping. If your motorized slide has stopped responding or is struggling to lift the weld head, the motor is often the culprit. The ESAB 0334322001 Motor is the direct replacement you need to get your equipment moving again. Designed specifically for ESAB slides, this 24V motor delivers the torque and speed (110 RPM) required to position your torch exactly where it needs to be.

We know that in the shop, "close enough" doesn't cut it for automated welding. You need the torch to track the joint perfectly every time. A worn-out motor can cause jerky movements, drift, or complete failure, ruining welds and wasting expensive consumables. This OEM motor restores the smooth, consistent motion you had when the machine was new. Because it's a genuine ESAB part, you don't have to worry about splicing wires or drilling new mounting holes—it bolts right in and plugs right up, so you can get back to burning wire faster.

This motor is rated for 24 volts, which is standard for most of these carriage and slide systems. The 110 RPM speed is tuned for that sweet spot between fast travel for setup and slow, controlled movement for fine-tuning during the weld or while setting the joint. Whether you are running a beam welder, a tank welder, or a custom gantry system, keeping your motion control components healthy is key to hassle-free operation.

Don't risk your weld quality on questionable aftermarket motors that might burn out in a week or lack the torque to lift a heavy sub-arc head. Stick with the original engineering. This motor is built to handle the heat and grit of the welding environment. Swap out that noisy or dead motor today and ensure your automated system continues to deliver the flawless beads you pride yourself on.