12601692 - Tweco EL22CT-62 Eliminator MIG Nozzle 5/8 Inch Coarse Thread (2-Pack)

Keep Your Arc Smooth with Tweco Eliminator Nozzles

Every welder knows that a clogged or damaged nozzle is the quickest way to ruin a good bead. If you are running a Tweco Eliminator MIG gun, the EL22CT-62 Gas Nozzle is the exact replacement part you need to keep your welds clean and your day productive. This pack gives you two fresh nozzles, so you aren't left scrambling when one finally gets too beat up to clean. The 5/8-inch bore is the "goldilocks" size for most MIG applications—wide enough to give you great gas coverage on spray transfer, but narrow enough to get into tighter joints without losing your shielding.

One of the best things about the Eliminator series is the coarse thread design. We've all fought with fine-thread nozzles that get welded shut with spatter or cross-threaded when you're in a hurry. These nozzles screw on and off easily, even after they've been subjected to serious heat. This means you can pop the nozzle off to check your contact tip or clean out the diffuser without needing a pipe wrench or damaging your gun. The copper alloy is tough and handles the heat well, meaning less spatter sticks to it compared to cheaper knock-offs.

Using the right nozzle is about more than just fit; it's about flow. These nozzles are designed to smooth out the turbulence in your shielding gas as it leaves the gun. Smoother gas flow means less oxygen gets into your weld pool, resulting in less porosity and a better-looking final product. Whether you are welding mild steel, stainless, or aluminum, having a clean, true-bore nozzle is critical.

Don't let a beat-up nozzle compromise your work. Swap in a fresh Tweco EL22CT-62 and notice the difference in your gas coverage and arc stability. With this 2-pack, you can keep one on the gun and one in your toolbox, ready for action. Remember to keep them clean with a pair of welpers or a reamer, and a little dip in nozzle gel goes a long way to making them last even longer.