13735631 - ESAB OKC 600A Cable Socket Connector for 2/0-3/0 Cable

Build Reliable Leads with ESAB 600A Sockets

As a welder, you know that a bad connection is the quickest way to ruin a good day. A loose or cheap connector gets hot, drops your voltage, and makes your arc sputter right when you need it smooth. The ESAB 0160361882 Cable Socket is built to fix exactly that. Rated for a massive 600 amps, this connector is designed for the heavy cables—specifically 2/0 and 3/0 AWG—that you use when you're burning big rod or running high-amperage flux core.

The first thing you'll notice is the build quality. The brass internal component is substantial, giving you plenty of surface area for the cable strands to make contact. This means less heat build-up at the joint and more power getting to your stinger or wire feeder. The rubber boot isn't that cheap plastic stuff that cracks in the cold; it's thick, flexible rubber that stands up to being dragged across concrete floors, stepped on, and hit with sparks. It provides a solid grip when you are twisting the connectors together, even if you are wearing heavy welding gloves.

Installation is straightforward. You strip your cable, insert it into the brass sleeve, and tighten it down securely (usually with a set screw or via crimping depending on your specific tool setup, though set screws are common for field repairs). Once assembled, this socket mates perfectly with compatible male plugs, locking in with a twist so you don't pull apart halfway through a weld. Whether you are building new extension leads or repairing a damaged whip, this ESAB socket gives you the confidence that your power delivery is solid.

Why Welders Choose This Connector

• Stays Cool: Heavy brass construction handles the heat so your hand doesn't have to.
• Tough Boot: Rubber insulation survives the shop floor environment.
• Secure Fit: Locks tight so you don't lose power when dragging leads.
• Versatile: Fits the common 2/0 and 3/0 cable sizes found in most heavy shops.