16501113 - Tweco 65-180 Straight MIG Gun Conductor Tube

Get Straight to the Point with the Tweco 65-180

Sometimes a standard curved MIG gun neck just gets in the way. Whether you are setting up a simple automation rig, mounting your gun to a carriage, or trying to weld down into a straight pipe or narrow channel, the Tweco 65-180 Straight Conductor Tube is the problem solver you need. This "straight shooter" converts your standard Tweco Spray Master MIG gun into a linear welding tool, giving you the reach and angle necessary for those hard-to-access jobs.

Built with the legendary durability Tweco is known for, this conductor tube stands up to the heat and abuse of daily industrial welding. It features a heavy-duty wall thickness that resists bending and damage from drops or knocks. Because it uses the same front-end consumables (tips, nozzles, diffusers) as your standard Spray Master setup, you don't need to buy a whole new set of parts just to use this tube. It swaps out easily—just unscrew your old 45-degree or 60-degree neck and screw this one in.

Pro Tip: When switching to a straight tube from a curved one, always check your liner length. A straight path effectively changes the internal distance slightly compared to a curve, so you may need to adjust your liner trim to prevent wire feed issues. This tube is an essential accessory for any fabrication shop that handles diverse geometries or semi-automated welding tasks.