950848 - ESAB 3PDT 3-Position Toggle Switch 6A 125V

Restore Your ESAB Welder with the 950848 Toggle Switch

There is nothing more frustrating than a welding machine that won't switch modes or power on correctly because of a broken $20 part. If your ESAB welder's control panel toggle switch has snapped off, become intermittent, or failed completely, the ESAB 950848 is the exact replacement you need to get back to burning rod. This isn't just a generic hardware store switch; it is a specific 3-Pole Double Throw (3PDT) component designed to handle the complex switching logic inside your welder.

Why is this switch special?
Most basic toggle switches only control one circuit (SPST). This heavy-duty unit controls three separate circuits at once and has three distinct positions. This is often used for switching between processes (like MIG vs. TIG), changing remote control settings, or managing other multi-state functions on your power source. It is rated for 6 Amps at 125 Volts, giving it plenty of capacity for the control signals it manages.

Installation Notes:
This switch features solder lug terminals. This means you will need a soldering iron to install it. While this takes a few minutes longer than plug-and-play connectors, it is actually a huge advantage for welding equipment. Welding machines vibrate—a lot. Fans run, transformers hum, and the machine gets dragged around the shop. Solder connections are permanent and won't wiggle loose like crimp connectors can. When you install this, you know it's going to stay connected for the long haul.

Don't risk your machine's electronics with a "close enough" aftermarket switch that might have the wrong internal contacts or lower amperage ratings. Stick with the genuine ESAB 950848 to ensure the throw action, the mounting hole size, and the electrical function match your machine perfectly. It comes with the mounting nut and washer, so you just need to desolder the old one, transfer the wires to the new lugs, and bolt it in.