Skip to Main Content
Canadian
Canadian owned and operated

11P63 - 3/4 Inch NPT 20 PSI Safety Relief Valve

Packaging: pack of 1
$1,433.86/EA $888.63/pack of 1 only $888.63/EASave 38%

Usually ships within 3-5 business days

OVERVIEW

Protect Your Shop and Equipment

Safety is the number one priority in any welding shop, and that extends beyond just helmets and gloves—it includes your gas delivery system. The ESAB 11P63 Relief Valve is a small but mighty guardian for your shop's gas lines. Set to open at 20 PSI, this valve prevents dangerous pressure build-ups that can occur due to regulator failure or thermal expansion in the lines. If the pressure in your system creeps past the safe limit of 20 PSI, this valve automatically pops open to release the excess gas, preventing blown hoses, damaged gauges, or worse.

Installation is straightforward thanks to the standard 3/4-inch NPT threading. This is a common size for many shop manifolds and distribution pipes, meaning you can likely thread this directly into your existing setup without hunting for obscure adapters. The brass construction is tough enough to handle the shop environment, resisting rust and standing up to the occasional bump or knock. It's a "set it and forget it" piece of equipment that works silently in the background to keep your operation running safely.

Why is a 20 PSI rating important? Many low-pressure gas systems and specific welding applications rely on consistent, low-pressure delivery. A spike in pressure can disrupt your shielding gas flow, leading to weld porosity or unstable arcs. By capping the pressure at 20 PSI, this relief valve not only protects your hardware but helps maintain the consistency of your gas delivery, contributing to better weld quality. It acts as a fuse for your gas system—sacrificing nothing but venting a little gas to save your expensive regulators and flowmeters.

Don't leave your gas manifold unprotected. Whether you are setting up a new bulk gas system or upgrading an old station, adding a reliable relief valve like the ESAB 11P63 is a smart investment in shop safety. It gives you the peace of mind to focus on laying perfect beads, knowing that your gas supply pressure is being mechanically monitored and controlled 24/7.

Additional Information
Pressure Rating:20 PSI
Connection Size:3/4" NPT
Product Type:Relief Valve
Material:Brass
Thread Type:NPT
Application:Gas Safety, Pressure Control
Packaging Description:pack of 1

INCLUDED

  • 1 x 20 PSI Relief Valve (3/4" NPT)

APPLICATIONS

  • Gas Manifold Systems
  • Low-Pressure Gas Distribution
  • Cryogenic Tank Safety
  • Industrial Piping Protection
  • Welding Gas Supply Lines

FAQ

This valve is set to relieve pressure at 20 PSI.

It features a 3/4-inch NPT (National Pipe Thread) connection.

No, this is typically a fixed-setting relief valve designed to actuate specifically at 20 PSI for safety compliance.

It is constructed from durable brass, suitable for most industrial gas applications.

This valve is primarily designed for gas pressure relief. Consult the manufacturer's datasheet for specific fluid compatibility.

Yes, relief valves of this type are designed to close (reseat) automatically once the system pressure drops back below the set limit.

The valve will open to vent the excess pressure until the system returns to a safe level below 20 PSI.

Yes, this is an ESAB genuine part, ensuring compatibility and reliability.