770130 - Hobart 3/16" x 25' Grade R Oxy-Acetylene Twin Welding Hose

Get Back to Burning with the Hobart 770130 Hose

Is your current welding hose looking a little worse for wear? If you're seeing cracks in the rubber, hearing hisses near the fittings, or wrestling with a line that's stiff as a board, it's time for an upgrade. The Hobart 770130 Oxy/Acetylene Twin Hose is the reliable workhorse you need to keep your flame steady and your shop safe. At 25 feet long, it gives you plenty of room to move around your project or vehicle without getting tangled up, but it's not so long that you're tripping over coils of excess rubber.

One of the best things about this hose is its size. It's a 3/16-inch diameter line, which is slightly slimmer than the bulky 1/4-inch hoses found on heavy construction sites. Why does that matter? Flexibility. When you're trying to do a precise weld or a clean cut, the last thing you want is a heavy hose fighting your hand movements. This lighter hose drapes easily and follows your lead, reducing fatigue in your wrist and arm during those long sessions under the hood. It connects effortlessly to your gear using standard "B" fittings—that's the most common size for almost all regulators and torches found in garages and fab shops. No crimping tools or hose clamps required; just wrench it on tight, and you're sealed.

Know Your Gas: This is a Grade R hose, which means it is built strictly for Acetylene. It loves Acetylene. It hates Propane. If you run a propane cutting rig, you need a different hose (Grade T). But for the classic oxy-acetylene setup that most of us learned on, this Grade R hose is the perfect, cost-effective choice. The lines are color-coded green and red, so you always know which is which, and the fittings are threaded differently to prevent accidental mix-ups. Don't risk a leak with old, dry-rotted gear—swap in this fresh Hobart hose and get back to making sparks fly with confidence.