HOSACET-20 - 25ft Red Acetylene Hose 1/4 Inch ID with B-Fittings

Reliable Red Acetylene Hose for Your Torch

Get the reach and reliability you need with our 25-foot Single Line Acetylene Hose. If you are a welder or fabricator, you know that a leaky or stiff hose is more than just an annoyance—it's a safety hazard. This replacement hose is built to keep you cutting and welding safely. It features a rugged red rubber exterior that stands up to the sparks, abrasion, and grime of the shop floor while maintaining the flexibility you need to maneuver your torch into tight spots.

This hose is a single line unit, meaning it is not bonded to an oxygen hose. This makes it the perfect solution for several scenarios. Perhaps your old twin hose developed a leak on the acetylene side only—why replace both when you can just swap out the damaged line? Or maybe your shop setup requires your oxygen and acetylene tanks to be spaced far apart. In either case, this hose gives you the freedom to configure your equipment exactly how you need it. The 1/4-inch diameter is the standard size for most medium to heavy-duty torches, ensuring you get the full flow required for clean cuts and stable flames.

We know that compatibility matters. That's why this hose comes pre-fitted with standard B-size brass nuts. The threads are Left-Handed (indicated by the notch on the nut), ensuring they will screw directly onto your standard acetylene regulator and torch handle without any adapters. The crimps are heavy-duty and pressure-tested to ensure a leak-free seal. Don't compromise on your gas delivery system; upgrade your rig with a fresh, safe, and flexible red acetylene hose that is ready to work as hard as you do.

Why Choose Single Line?

While twin hoses are common, single lines offer superior flexibility and are easier to coil and store when used individually. They also reduce the drag weight on your torch handle if you are supporting the lines separately, potentially reducing wrist fatigue during long cutting jobs.