Skip to Main Content
Canadian
Canadian owned and operated

K115-4 - Lincoln Magnum Classic K115-4 Innershield Welding Gun 450A 15ft

Packaging: 1 Per Ea
$2,665.30/EA $1,715.79/1 Per Ea only $1,715.79/EASave 36%

Usually ships within 3-5 business days

OVERVIEW

Lincoln K115-4 Magnum Innershield Gun - 450 Amp

When the job takes you out of the shop and into the field, you need equipment that can handle the elements and the rough conditions of a construction site. The Lincoln Electric K115-4 Magnum Classic Welding Gun is the industry heavyweight champion for self-shielded flux-cored welding. Whether you are welding bridge girders, erecting structural steel, or repairing heavy earth-moving equipment, this gun delivers the power and durability required to lay down serious metal. Rated at 450 amps, it provides the thermal capacity needed for high-deposition wires, ensuring you get deep penetration and solid welds every time.

The K115-4 is often referred to as the "Innershield Gun" because it is optimized for Lincoln's Innershield wires. Since it uses a self-shielded process, there is no need to drag heavy gas cylinders around the job site or worry about the wind blowing away your shielding gas. This makes the K115-4 the ultimate tool for outdoor welding. The 15-foot cable gives you plenty of reach, allowing you to move around large assemblies without constantly repositioning your wire feeder. The cable itself is protected by a tough, reinforced rubber jacket that resists tears and burns, ensuring your equipment survives the daily grind of ironworking.

Comfort and control are critical when welding for long shifts. The K115-4 features a comfortable handle and a heavy-duty trigger that provides tactile feedback and reliable arc starting. The 82-degree neck angle is standard, but the system is flexible; if you encounter a tight spot, you can swap out the tube for different angles to get the job done. This gun comes set up for 3/32" wire right out of the box, complete with a severe duty contact tip and insulated guides, so you can hook it up and start burning wire immediately. It supports wire sizes up to 0.120", giving you the flexibility to tackle the thickest plates.

Invest in a tool that works as hard as you do. The Lincoln Magnum Classic K115-4 is not just a welding gun; it's a reliable partner for the toughest welding projects. Its simple air-cooled design means fewer points of failure, and its NEMA EW3 rating guarantees it meets rigorous industry standards. From the high-rise to the shipyard, trust Lincoln Electric and the K115-4 to keep your arc lit and your welds passing inspection.

Additional Information
Brand:Lincoln Electric
Amperage:450
Duty Cycle:60%
Packaging Description:1 Per Ea
Process Type:FCAW-SS (Flux-Cored Self-Shielded)
Cable Length:15 ft
Wire Diameter Capacity:3/32" (2.4 mm), 0.120" (3.0 mm)
Cooling Method:Air Cooled
Gun Tube Angle:82 Degrees
Amperage Rating:450A
Net Weight:5.14 kg

INCLUDED

  • Lincoln Magnum Classic 450A FCAW-SS Gun (K115-4)
  • 15 ft (4.5 m) Cable Assembly
  • 3/32 in. Severe Duty Contact Tip (KP2103-4B1)
  • 1-1/2 in. Stickout Insulated Guide (KP1971-1)
  • 2-3/4 in. Stickout Insulated Guide (KP1965-1)
  • 82-degree Gun Tube
  • Heavy-Duty Gun Trigger Switch

APPLICATIONS

  • Industrial Fabrication
  • Heavy Equipment Repair and Manufacturing
  • Shipbuilding and Offshore Construction
  • Structural Steel Erection
  • Bridge Construction and Ironworking
  • Pipeline Construction
  • Field Erection Sites

FAQ

The Lincoln K115-4 is rated for 450 amps at a 60% duty cycle, meeting NEMA specification EW3.

No, the K115-4 is designed for Flux-Cored Self-Shielded (FCAW-SS) welding, also known as Innershield, and does not use external gas.

The gun comes from the factory ready to feed 3/32 inch (2.4 mm) wire.

The K115-4 can accommodate wire diameters ranging from 3/32 inch up to 0.120 inch (3.0 mm).

This model features a 15-foot (4.5 meter) cable assembly.

Yes, the gun comes with an 82-degree tube, but alternate gun tubes are available for reaching welds with limited accessibility.

It includes a 3/32 Severe Duty Contact Tip (KP2103-4B1), a 1-1/2 in. Stickout Insulated Guide (KP1971-1), and a 2-3/4 in. Stickout Insulated Guide (KP1965-1).

The K115-4 is an air-cooled semiautomatic welding gun.

CATALOGUE & SPEC SHEETS

Spec Sheet