KP2067-9B1 - Lincoln Electric 3/64 Aluminum Contact Tip (10-Pack)

Master Aluminum Welding with the Right Consumables

Welding aluminum can be a frustrating experience if you aren't using the right equipment. The soft nature of aluminum wire makes it prone to kinking, buckling, and fusing to the contact tip if the setup isn't perfect. The Lincoln Electric KP2067-9B1 Contact Tip is your solution for smoother, more reliable aluminum MIG welding. Designed specifically for 3/64 inch (1.2 mm) aluminum wire, these tips take the headache out of feeding soft alloys. Whether you are repairing a boat hull, fabricating a custom intake manifold, or working on an aluminum trailer, these contact tips provide the precision you need to lay down perfect beads every time.

Why Choose Aluminum-Specific Tips?

You might be tempted to use a standard steel contact tip for your aluminum projects, but that is often a recipe for disaster. Aluminum expands much more than steel when it gets hot. A standard tip can become too tight as the wire heats up, causing the wire to seize and burn back into the gun. The KP2067-9B1 is manufactured with a slightly larger bore geometry specifically calculated to handle this expansion. This means the wire glides through freely, maintaining good electrical contact without getting stuck. The result is a stable arc, less spatter, and far fewer interruptions to clean or replace your tip.

Genuine Lincoln Electric Quality

When you are in the middle of a critical weld, the last thing you want is a low-quality consumable failing on you. These contact tips are genuine Lincoln Electric parts, meaning they are built to the highest standards of quality and consistency. The copper alloy is selected for maximum conductivity and heat resistance, ensuring the tip lasts longer and performs better. This 10-pack ensures you have plenty of spares on hand, so you never have to stop a project to run to the store. Keep your MIG gun running at peak performance and ensure your aluminum welds look professional with the right contact tips.

Consistent Arc, Better Welds

A stable arc starts with good contact. The KP2067-9B1 ensures that the welding current is transferred to the wire consistently. This is crucial for aluminum, where a fluctuating arc can lead to soot, lack of fusion, or unsightly welds. By using a tip designed for the job, you improve the start of every weld and maintain a smooth spray transfer or pulse arc throughout the pass. Upgrade your consumables and experience the difference that a purpose-built aluminum contact tip can make in your daily welding work.