Canadian owned and operated
As a welder, you know that the contact tip is the final transfer point for your welding current, and it takes a beating. If you are tired of your tips wearing out halfway through a shift, or if you are experiencing burnback and erratic arcs as your tip heats up, the ESAB M6 x 28mm CuCrZr contact tip is the upgrade you need. Designed specifically for 1.2mm (0.045") wire, this tip isn't just standard copper—it's engineered with a Copper-Chrome-Zirconium alloy that stands up to the intense heat of the welding arc far better than generic tips.
Why does the material matter? Standard copper tips get soft when they get hot. As they soften, the wire wears out the hole into an oval shape (keyholing), causing the wire to wander and the arc to sputter. CuCrZr tips are harder and retain their shape even under high-amperage loads. This means you get a consistent, focused arc for longer, allowing you to lay down smooth beads without constantly stopping to swap out consumables. Whether you are welding structural steel, heavy equipment, or running long passes in spray transfer mode, this tip handles the heat.
Installation is seamless with the standard M6 thread, fitting perfectly onto your ESAB PSF series gun or any compatible MIG torch. The 28mm length ensures your tip sits at the correct recess or stick-out relative to your nozzle, maintaining proper gas coverage for defect-free welds. Don't let a cheap piece of copper ruin a critical weld or slow down your production. Switch to ESAB's high-performance CuCrZr tips and experience the difference in longevity and arc quality.
| Additional Information |
|---|
| Brand:ESAB |
| Item:Contact Tip |
| Packaging Description:1 Per Ea |
| Thread Size:M6 |
| Length:28 mm |
| Wire Diameter:1.2mm, 0.045" |
| Material:Copper Chromium Zirconium (CuCrZr) |
| Process:MIG/MAG |
