26422300 - Tweco AK353 Gas Hose Assembly for Lincoln Feeders

Fix Your Gas Flow with the Tweco AK353 Hose

If you are running a Lincoln wire feeder with a Tweco MIG gun, you know that the adapter kit is the heart of that connection. Inside that setup, the gas hose is the unsung hero that makes sure your shielding gas actually gets from the machine to your torch. The Tweco AK353 Gas Hose Assembly (2642-2300) is the direct replacement for that little jumper hose that connects your feeder's solenoid to the adapter block. We've all been there—you're welding along and suddenly you start seeing porosity, or you can hear a faint hiss coming from the feeder. Often, it's just an old, cracked hose that has finally given up the ghost.

Don't try to patch it up with tape or make do with a generic hose that doesn't fit quite right. This genuine Tweco assembly is pre-cut and designed exactly for the AK353 adapter kit used on Lincoln machines. It comes with the clamp you need to lock it down tight, so you don't have to go digging through your toolbox for a spare. Installing this hose is a quick fix that can solve major headache issues regarding weld quality. A solid gas connection means better arc stability, cleaner beads, and less time grinding out bad welds.

Whether you are setting up a new adapter kit or refurbishing an old reliable feeder, this hose is a must-have. It is built tough to handle the shop environment, resisting kinks and cuts. When your equipment works right, you can focus on dropping dimes instead of chasing leaks. Grab a Tweco 2642-2300 Gas Hose Assembly and keep your shielding gas where it belongs: on the weld.