KP22-62 - Lincoln Magnum 200 Series Adjustable Gas Nozzle 5/8 Inch

Customize Your Stick-Out with the KP22-62

Every welder knows that the right nozzle can make or break a day under the hood. The Lincoln Electric KP22-62 is the go-to gas nozzle for operators running Magnum 200 Series MIG guns who need versatility and reliability. With a 0.62-inch (5/8") ID, this nozzle hits the sweet spot for gas coverage—wide enough to keep your puddle clean during hot passes, but narrow enough to see what you are doing. Whether you are fabricating mild steel brackets or running production beads, this nozzle delivers the smooth gas flow you need to keep porosity at bay.

The real advantage of the KP22-62 is its adjustable slip-on design. We've all been there: you need to get into a tight fillet weld, but your nozzle is dragging, or you need a deeper recess to protect your tip during high-heat spray transfer. Because this nozzle slips onto the gun tube rather than threading on, you can slide it back and forth to dial in your perfect nozzle-to-tip relationship. Want a 1/8" recess? Just slide it out. Need to run flush? Push it back. It stays put thanks to a tight friction fit but comes off easily when it's time to clean out the spatter or swap a contact tip.

Built tough by Lincoln Electric, this copper nozzle handles the heat of 200-amp welding without warping or melting. It is designed to take a beating in the shop environment. To keep it running like new, give it a quick dip in nozzle gel before you start burning wire, and the spatter will drop right out. When you are using genuine Lincoln consumables like the KP22-62, you aren't just buying a part; you're buying the assurance that your gun will feed and shield exactly the way it was meant to. Keep a few in your toolbox so you are never caught with a clogged or battered nozzle when the deadline is approaching.